Help
JL Audio XDM800/8-24V 8 Channel 800 W Class D Full-Range Car/Marine Amplifier - #98689
Product Descriptions
Product Descriptions
JL Audio XDM800/8-24V 8 Channel 800 W Class D Full-Range Car/Marine Amplifier - #98689
The JL Audio XDM800/8-24V is built to deliver high-efficiency, full-range performance across eight channels—giving you clean, consistent sound power in 24-volt systems. Whether you're on the water or off-road, this amplifier brings flexibility, clarity, and muscle to any premium setup.
24 Volt: Not for use in 12V Systems!
800 Watts of Flexible Full-Range Power
With eight channels and a total output of 800 watts, this amplifier gives you serious freedom to build out your system exactly the way you want:
- Power four speaker pairs with 75W x 8
- Drive front and rear channels with 75W x 4, plus two subwoofers with 200W each
- Boost two speakers with 200W each and feed four more with 75W each
- Run a bridged 4-channel setup with 200W x 4
- Or build a full system with two 200W main speakers and two 200W subs
This level of control and configuration makes it easy to dial in your ideal soundstage—whether it’s all highs, all lows, or a full-range mix.
NexD™ Switching Technology
At the heart of the XDM800/8-24V is JL Audio’s NexD™ Class D tech. This ultra-high-speed design delivers clean, efficient power while keeping distortion low and heat output minimal. The result? High performance with reduced current draw and better long-term reliability.
Precision Signal Control
Every channel bank is equipped with a 12 dB/octave filter that can be configured for low-pass or high-pass output. A fully adjustable frequency range from 50 to 500 Hz lets you fine-tune your system exactly where you want it.
- Filter Modes: Off / Low-Pass / High-Pass
- Frequency Range: 50 Hz – 500 Hz
- Slope: 12 dB/octave
- Buffered Preamp Outputs: Included
- Remote Level Control Compatibility: HD-RLC or MHD-RLC (sold separately)
Built for Demanding Environments
Designed with marine and mobile setups in mind, the XDM800/8-24V features a corrosion-resistant aluminum chassis, powder-coated finish, and stainless steel hardware. The sealed control cover protects against moisture, salt, and dust—keeping everything clean and operational.
Studio-Grade Audio Quality
You get audiophile-level clarity thanks to differential-balanced inputs and a dual-mode input filter. These design features reduce unwanted noise and interference, resulting in a pure, refined signal no matter where you install it.
- Frequency Response: 12 Hz – 22 kHz
- Signal-to-Noise Ratio (Full Power): >104 dB
- Signal-to-Noise Ratio (1W): >84 dB
- THD+N @ Rated Power: <1% at 2Ω per channel
Thermal Rollback Protection
Smart thermal rollback circuitry ensures the amp keeps playing—even under intense conditions. Instead of shutting down, it self-adjusts output to prevent overheating and protect your gear without missing a beat.
Auto Turn-On Options
You get three choices for system activation:
- Auto signal sensing with +12V remote output
- DC-offset sensing with +12V remote output
- Standard +12V remote input
Compact Yet Powerful
Despite its compact size, this amp delivers consistent output across a wide voltage range:
- @ 28.8V: 100W x 8 @ 2Ω | 90W x 8 @ 4Ω | 180W x 4 bridged @ 4Ω
- @ 25V: Same power ratings as above
- @ 14.4V & 12.5V: Slightly reduced output to match system conditions
Dimensions:
- Height: 2.05" (52 mm)
- Width: 14.73" (374 mm)
- Depth: 7.09" (180 mm)
- Fuse Rating: 80A
- Input Voltage Range (RCA): 200 mV – 4 V RMS
- Power/Ground Wire Gauge: 4 AWG minimum
The JL Audio XDM800/8-24V gives you the flexibility to run complex audio systems with clarity and confidence, all in a sleek, efficient package ready for marine or mobile use.
FAQs
- Can the JL Audio XDM800/8-24V power subwoofers and full-range speakers together? Yes, it supports multiple configurations including setups with subs and full-range speakers simultaneously.
- Does this amplifier include high-pass and low-pass filters? Yes, each channel bank features a 12 dB/octave filter that can be set to either mode and fine-tuned between 50 and 500 Hz.
- What remote level controls are compatible with this amp? It supports both the HD-RLC and water-resistant MHD-RLC remote level controls.
- What’s the maximum power output per channel at 2 ohms? It delivers 100 watts RMS per channel at 2 ohms when operating at 28.8V.
- Is the amplifier built for harsh environments like marine settings? Yes, the powder-coated chassis, stainless steel hardware, and sealed control panel are designed to resist corrosion and environmental wear.
Features & Specs
Features & Specs
Documents
Documents
Warranty
Warranty
Payment as low as
This monthly payment does not include any applicable tax or interest
Free Shipping |
Lowest Price Guarantee*
This product is backorderable
Sign up to get notified when it's in stock!
Call 1-866-696-7189
Does not apply to special order items.
Product Descriptions
Product Descriptions
JL Audio XDM800/8-24V 8 Channel 800 W Class D Full-Range Car/Marine Amplifier - #98689
The JL Audio XDM800/8-24V is built to deliver high-efficiency, full-range performance across eight channels—giving you clean, consistent sound power in 24-volt systems. Whether you're on the water or off-road, this amplifier brings flexibility, clarity, and muscle to any premium setup.
24 Volt: Not for use in 12V Systems!
800 Watts of Flexible Full-Range Power
With eight channels and a total output of 800 watts, this amplifier gives you serious freedom to build out your system exactly the way you want:
- Power four speaker pairs with 75W x 8
- Drive front and rear channels with 75W x 4, plus two subwoofers with 200W each
- Boost two speakers with 200W each and feed four more with 75W each
- Run a bridged 4-channel setup with 200W x 4
- Or build a full system with two 200W main speakers and two 200W subs
This level of control and configuration makes it easy to dial in your ideal soundstage—whether it’s all highs, all lows, or a full-range mix.
NexD™ Switching Technology
At the heart of the XDM800/8-24V is JL Audio’s NexD™ Class D tech. This ultra-high-speed design delivers clean, efficient power while keeping distortion low and heat output minimal. The result? High performance with reduced current draw and better long-term reliability.
Precision Signal Control
Every channel bank is equipped with a 12 dB/octave filter that can be configured for low-pass or high-pass output. A fully adjustable frequency range from 50 to 500 Hz lets you fine-tune your system exactly where you want it.
- Filter Modes: Off / Low-Pass / High-Pass
- Frequency Range: 50 Hz – 500 Hz
- Slope: 12 dB/octave
- Buffered Preamp Outputs: Included
- Remote Level Control Compatibility: HD-RLC or MHD-RLC (sold separately)
Built for Demanding Environments
Designed with marine and mobile setups in mind, the XDM800/8-24V features a corrosion-resistant aluminum chassis, powder-coated finish, and stainless steel hardware. The sealed control cover protects against moisture, salt, and dust—keeping everything clean and operational.
Studio-Grade Audio Quality
You get audiophile-level clarity thanks to differential-balanced inputs and a dual-mode input filter. These design features reduce unwanted noise and interference, resulting in a pure, refined signal no matter where you install it.
- Frequency Response: 12 Hz – 22 kHz
- Signal-to-Noise Ratio (Full Power): >104 dB
- Signal-to-Noise Ratio (1W): >84 dB
- THD+N @ Rated Power: <1% at 2Ω per channel
Thermal Rollback Protection
Smart thermal rollback circuitry ensures the amp keeps playing—even under intense conditions. Instead of shutting down, it self-adjusts output to prevent overheating and protect your gear without missing a beat.
Auto Turn-On Options
You get three choices for system activation:
- Auto signal sensing with +12V remote output
- DC-offset sensing with +12V remote output
- Standard +12V remote input
Compact Yet Powerful
Despite its compact size, this amp delivers consistent output across a wide voltage range:
- @ 28.8V: 100W x 8 @ 2Ω | 90W x 8 @ 4Ω | 180W x 4 bridged @ 4Ω
- @ 25V: Same power ratings as above
- @ 14.4V & 12.5V: Slightly reduced output to match system conditions
Dimensions:
- Height: 2.05" (52 mm)
- Width: 14.73" (374 mm)
- Depth: 7.09" (180 mm)
- Fuse Rating: 80A
- Input Voltage Range (RCA): 200 mV – 4 V RMS
- Power/Ground Wire Gauge: 4 AWG minimum
The JL Audio XDM800/8-24V gives you the flexibility to run complex audio systems with clarity and confidence, all in a sleek, efficient package ready for marine or mobile use.
FAQs
- Can the JL Audio XDM800/8-24V power subwoofers and full-range speakers together? Yes, it supports multiple configurations including setups with subs and full-range speakers simultaneously.
- Does this amplifier include high-pass and low-pass filters? Yes, each channel bank features a 12 dB/octave filter that can be set to either mode and fine-tuned between 50 and 500 Hz.
- What remote level controls are compatible with this amp? It supports both the HD-RLC and water-resistant MHD-RLC remote level controls.
- What’s the maximum power output per channel at 2 ohms? It delivers 100 watts RMS per channel at 2 ohms when operating at 28.8V.
- Is the amplifier built for harsh environments like marine settings? Yes, the powder-coated chassis, stainless steel hardware, and sealed control panel are designed to resist corrosion and environmental wear.
