Kanto FMC4 Full Motion TV Wall Mount with 26" Extension

Kanto FMC4 Full Motion TV Wall Mount with 26" Extension

The Kanto FMC4 gives you the flexibility to position your TV exactly where you need it, whether you're setting up a home entertainment space or a commercial display. Designed for TVs from 30 to 60 inches and supporting up to 100 lb, this heavy-duty full motion mount combines a sliding pivot point, generous extension, wide swivel range, and adjustable tilt in one versatile design.

Flexible Full Motion Viewing

Need to angle your screen toward another part of the room? The Kanto FMC4 can swivel up to 135° in either direction, depending on your TV size and extension. This broad range of motion lets you adjust the screen for different viewing areas instead of being locked into one fixed position.

The mount also provides +10° to -5° of tilt. Tilt the TV forward for higher wall placements or slightly backward for lower mounting positions. Once you find the angle you want, the included Allen key lets you tighten the tilt tension using the two hex bolts on the tilt head.

Extends Up to 26 Inches from the Wall

The Kanto FMC4 extends from 3.1 inches to as far as 26 inches from the wall. That extra reach gives you more freedom when positioning your TV, especially when you need greater movement or want to adjust the screen toward a different viewing area.

Even at full extension, its solid steel construction is designed to support TVs weighing up to 100 lb without sagging.

Sliding Pivot Point for Better Positioning

One of the most useful features of the Kanto FMC4 is its adjustable sliding pivot point. The pivot can move 20 inches to the left or right, allowing the arm and TV plate to shift laterally across the wall plate.

Why does that matter? Your wall studs are not always exactly where you want the centre of your TV to be. This design gives you additional positioning flexibility while also making it possible to move the TV toward either side when your room layout calls for it.

Compatible with TVs from 30 to 60 Inches

The Kanto FMC4 supports TVs from 30 to 60 inches; additionally, it handles weights up to 100 lb (45 kg). Moreover, it supports VESA patterns from 100×100 to 600×400, therefore providing compatibility with TVs meeting these requirements.

The 26.8-inch wall plate can accommodate dual studs with spacing up to 24 inches, giving the mount a substantial base for compatible wall configurations.

Heavy-Duty Solid Steel Construction

Supporting a larger TV requires a mount built for the job. The Kanto FMC4 uses heavy-duty solid steel construction and weighs 21.6 lb itself. Its sturdy build supports TVs up to the specified 100 lb limit while still providing the movement expected from a full motion wall mount.

Integrated Cable Management

A flexible TV mount should not leave cables hanging loosely behind your display. The Kanto FMC4 includes integrated cable management that helps route power and video cables neatly between your TV and the wall.

This keeps the area around your mounted television more organized while maintaining a cleaner overall appearance as you adjust the screen.

Adjustable Horizontal Leveling

Heavier televisions can sometimes twist slightly when positioned off-centre on the TV plate. The Kanto FMC4 includes horizontal leveling adjustment, allowing you to correct the TV's alignment after mounting.

A simple adjustment helps keep the television level even when you change its lateral position.

Designed for Home and Commercial Spaces

The wide range of movement makes the Kanto FMC4 suitable for both home and commercial applications. Its 26-inch extension, sliding pivot system, swivel range, tilt adjustment, and lateral positioning make it useful when a basic fixed mount would be too restrictive.

Whether the screen needs to remain centred or move toward one side of the room, the mount gives you several ways to fine-tune its placement.

What’s Included

• Paper wall template for marking pilot holes
• Installation manual
• Mounting hardware for wood stud and concrete installation
• Allen key for tilt tension adjustment

Kanto FMC4 Specifications

• TV size compatibility: 30" to 60"
• Weight allowance: 100 lb (45 kg)
• VESA compatibility: 100×100 to 600×400
• Tilt range: +10° to -5°
• Swivel range: Up to 135° in either direction, depending on screen size
• Extension: 3.1" to 26" from the wall
• Sliding pivot point: Moves 20" left or right
• Wall plate width: 26.8" (68 cm)
• Stud spacing: Up to 24"
• Integrated cable management
• Adjustable horizontal leveling
• Product weight: 21.6 lb (9.8 kg)
• Shipping box weight: 25.4 lb (11.5 kg)
• Shipping box dimensions: 28.5" × 12.8" × 3.9" (72.5 × 32.5 × 10 cm)
• UPC: 800152712239

Versatile Positioning Without a Fixed View

The Kanto FMC4 is built for situations where screen positioning matters just as much as support. With up to 26 inches of extension, 135° of swivel in either direction, adjustable tilt, a sliding pivot point, and horizontal leveling, it gives you far more control than a basic wall mount. For compatible TVs from 30 to 60 inches, it provides a solid and highly adjustable way to manage your viewing position.

Frequently Asked Questions

What TV sizes are compatible with the Kanto FMC4? The Kanto FMC4 supports TVs ranging from 30 inches to 60 inches.

How much weight can the Kanto FMC4 support? It supports televisions weighing up to 100 lb or 45 kg.

How far does the Kanto FMC4 extend from the wall? The mount extends from 3.1 inches to a maximum of 26 inches from the wall.

Can the Kanto FMC4 move left or right across the wall plate? Yes. Its sliding pivot point can move up to 20 inches left or right for additional lateral positioning.

What VESA patterns does the Kanto FMC4 support? It supports VESA mounting patterns ranging from 100×100 to 600×400.