Kanto FMX3C Full Motion TV Wall Mount with 28" Extension

Kanto FMX3C Full Motion TV Wall Mount with 28" Extension

The Kanto FMX3C gives you flexible control over large-screen positioning with a heavy-duty full motion design. Built for TVs from 50 to 100 inches and weighing up to 150 lb, this solid steel mount extends up to 28 inches from the wall while letting you swivel, tilt, and reposition your screen for a better viewing angle.

Built to Support Large TVs

The Kanto FMX3C uses solid steel construction and is designed and tested to support TVs weighing up to 150 lb, or 68 kg. Even when the TV reaches the mount's maximum weight capacity and extension, the articulating arms are designed to keep the screen securely positioned without sagging.

Up to 28 Inches of Extension

The Kanto FMX3C extends from 4 to 28 inches, giving you more freedom to position your TV. Additionally, the extended reach helps bring your screen forward from recessed locations. Moreover, it provides extra flexibility when positioning your TV over fireplaces.

This extended reach can also help bring your TV forward from recessed locations or position it farther out over fireplaces. Like pulling out a drawer, the articulating design gives you access and flexibility without permanently changing the TV's viewing position.

88° Swivel in Either Direction

The articulating arms allow the Kanto FMX3C to swivel up to 88° to either side, depending on TV size. This lets you direct the screen toward different seating areas instead of keeping your viewing angle fixed straight ahead.

Whether you're seated off-center or want to reposition the display, the wide swivel range gives you more control over where the screen faces.

Adjustable Tilt for Better Viewing

The Kanto FMX3C provides a tilt range from +15° to -5°. This gives you another way to adjust your line of sight and position the screen according to your preferred viewing angle.

Combined with its extension and swivel range, the tilt adjustment makes the mount flexible across several viewing positions.

Wide VESA Compatibility

The Kanto FMX3C supports VESA patterns from 200×100 to 700×500 for broad compatibility. Additionally, it accommodates a variety of large TVs within its supported range. Furthermore, the mount is designed for compatible screens from 50 to 100 inches.

Wide 26.8-Inch Wall Plate

A 26.8-inch dual-stud wall plate gives the Kanto FMX3C flexibility when positioning the mount. It accommodates wood studs spaced up to 24 inches apart and works with common 16-inch or 24-inch stud centers.

On 16-inch studs, the wide wall plate also allows the mount to be offset up to 10 inches left or right, giving you additional control over where the TV sits on the wall.

Integrated Cable Management

Moving your TV forward can make cables harder to organize, while the Kanto FMX3C helps keep them tidy. Additionally, removable cable clips attach directly to the extension arms for convenient routing. Moreover, the clips help maintain a clean, organized setup as you reposition your TV.

The clips can sit on any of the six arms, allowing cables to route neatly toward the wall. Additionally, this flexible placement helps keep wiring organized as the mount moves. Moreover, cables remain controlled while the TV extends, swivels, or retracts.

Kanto FMX3C Key Features

• Supports TVs from 50 to 100 inches
• Maximum weight capacity of 150 lb (68 kg)
• VESA compatibility from 200×100 to 700×500
• Extends from 4 to 28 inches from the wall
• Swivels up to 88° in either direction, depending on TV size
• +15° to -5° tilt range
• 26.8-inch dual-stud wall plate
• Supports wood stud spacing up to 24 inches
• Can be offset up to 10 inches left or right on 16-inch studs
• Removable cable management clips for organized wiring
• Adjustable horizontal leveling

Convenient Setup Hardware Included

The Kanto FMX3C comes with a paper wall template that helps accurately mark pilot holes before mounting. It also includes an installation manual and the required mounting hardware for wood stud and concrete applications, along with anchors for concrete or brick surfaces.

What’s Included

• FMX3C Full Motion TV Wall Mount
• Paper wall template for marking pilot holes
• Installation manual
• Mounting hardware for wood stud and concrete applications
• Adjustable horizontal leveling

Product Measurements

The Kanto FMX3C weighs 32.6 lb (14.8 kg), while its shipping weight reaches 34 lb (15.4 kg). Additionally, the box measures 31.9 × 12.8 × 4.3 inches. Furthermore, its metric dimensions are 81 × 32.5 × 11 cm. Finally, the product UPC is 800152015590.

Flexible Positioning for Large Screens

The Kanto FMX3C combines heavy-duty support with an impressive range of motion for large TVs. Its 28-inch extension, 88° swivel, adjustable tilt, broad VESA compatibility, and wide wall plate give you plenty of flexibility when positioning your screen. Add organized cable routing and support for TVs up to 150 lb, and you get a practical full motion solution built for demanding large-screen setups.

Frequently Asked Questions

What TV sizes does the Kanto FMX3C support? The Kanto FMX3C is designed for TVs ranging from 50 to 100 inches.

How much weight can the Kanto FMX3C support? It supports TVs weighing up to 150 lb, or 68 kg.

How far does the Kanto FMX3C extend from the wall? The mount extends from 4 inches to a maximum of 28 inches from the wall.

What VESA patterns are compatible with the Kanto FMX3C? It supports VESA patterns ranging from 200×100 to 700×500.

How much can the Kanto FMX3C swivel and tilt? It swivels up to 88° in either direction, depending on TV size, and tilts from +15° to -5°.