Kanto TE300 Extend & Tilt TV Wall Mount for 43"–90" TVs with 150 lb Capacity

Kanto TE300 Extend & Tilt TV Wall Mount for 43"–90" TVs with 150 lb Capacity

The Kanto TE300 gives you the clean look of a tilting TV wall mount while adding the flexibility to extend, pan, and access connections behind your screen. Designed for TVs from 43" to 90", this solid steel mount supports up to 150 lb and accommodates VESA patterns from 100 x 100 to 600 x 450.

Extend Your TV Up to 6 Inches

Ever tried reaching a cable behind a TV mounted close to the wall? The Kanto TE300 extends up to 6" from the wall, giving you easier access to your TV's inputs and cables. This added movement means you do not need to plan every connection before placing your television on the mount.

When pushed back, the mount keeps your screen just 2.4" from the wall. As a result, you get convenient rear access without giving up the streamlined profile you expect from a tilt mount.

Forward and Backward Tilt for Better Viewing

The Kanto TE300 lets you tilt your television up to 12 degrees forward or 2 degrees backward. This movement can help reduce glare and improve your line of sight, particularly when you position the screen above eye level.

Instead of keeping your TV locked into one viewing angle, the mount gives you room to fine-tune the screen until the picture feels more comfortable from your seating position.

Pan Your TV Left or Right

A traditional tilt mount usually focuses on vertical movement. However, the Kanto TE300 uses its extension capability to let your television pan up to 8 degrees left or right.

Think of it as giving your screen a small steering range. You can adjust its direction without requiring the movement of a full-motion wall mount.

Supports 43" to 90" TVs Up to 150 lb

Built from solid steel with a durable powder-coated finish, the Kanto TE300 supports televisions weighing up to 150 lb, or 68 kg. It works with TV sizes ranging from 43" to 90", making it suitable for a wide variety of larger flat-panel displays.

The mount supports VESA patterns from 100 x 100 through 600 x 450, giving you broad compatibility within its specified TV size and weight range.

More Control Over TV Placement

Getting the TV onto the wall is only part of the job. The Kanto TE300 uses oversized TV brackets that allow vertical adjustment, while its wide wall plate provides horizontal positioning flexibility.

This combination helps you place your screen where you want it instead of letting the wall studs completely dictate its final position.

Post-Installation Leveling

If your television needs a small adjustment after mounting, the Kanto TE300 includes individual leveling screws on top of each mounting bracket. These adjustments help you straighten the screen without having to reposition the entire wall plate.

It is a small feature, but like straightening a picture frame after hanging it, a few minor corrections can make the finished setup look noticeably cleaner.

Open Wall Plate for Cable Routing

The Kanto TE300 features a spacious open-frame wall plate that gives you room for cable routing behind the television. Its open design can also accommodate placement over electrical outlets or media boxes.

The 27" dual-stud wall plate supports stud spacing up to 24", while the included mounting hardware supports wood stud and concrete applications.

Kanto TE300 Features at a Glance

• Designed for 43" to 90" TVs
• Supports up to 150 lb (68 kg)
• VESA compatibility from 100 x 100 to 600 x 450
• Extends up to 6" (15.2 cm) from the wall
• Sits 2.4" (6.1 cm) from the wall when pushed back
• Tilts up to 12° forward and 2° backward
• Pans up to 8° left or right
• Oversized TV brackets provide vertical adjustment
• Wide wall plate allows horizontal adjustment
• Post-installation leveling screws help straighten the TV
• Open wall plate provides space for cable routing
• 27" dual-stud wall plate accommodates up to 24" stud spacing
• Solid steel construction with a durable powder-coated finish
• Adjustable horizontal leveling
• 5-year warranty

What's Included

• Installation manual
• Drill template
• Mounting hardware for wood stud and concrete applications

Specifications

• TV Size Compatibility: 43" to 90"
• Weight Allowance: 150 lb (68 kg)
• VESA Sizes: 100 x 100 to 600 x 450
• Wall Profile: 2.4" (6.1 cm)
• Maximum Extension: 6" (15.2 cm)
• Forward Tilt: Up to 12°
• Backward Tilt: Up to 2°
• Left/Right Pan: Up to 8°
• Wall Plate: 27" (68.6 cm) dual-stud wall plate
• Maximum Stud Spacing: 24"
• Material: Solid steel with durable powder-coated finish
• Product Weight: 12.1 lb (5.5 kg)
• Shipping Box Weight: 13.9 lb (6.3 kg)
• Shipping Box Dimensions: 30.4" x 6.8" x 3.9" (77.3 x 17.3 x 9.8 cm)
• UPC: 800152721347

A Tilting Mount with More Room to Adjust

The Kanto TE300 combines a slim 2.4" wall profile with 6" of extension, adjustable tilt, limited side-to-side panning, and flexible screen positioning. If you want the simplicity of a tilt mount but also want easier cable access and more control over your TV's position, the Kanto TE300 gives you those adjustments while supporting TVs up to 90" and 150 lb.

Frequently Asked Questions

What TV sizes are compatible with the Kanto TE300? The Kanto TE300 supports televisions ranging from 43" to 90".

How much weight can the Kanto TE300 support? It supports televisions weighing up to 150 lb, or 68 kg.

How far can the mount extend from the wall? The mount extends up to 6" (15.2 cm) and sits 2.4" (6.1 cm) from the wall when fully pushed back.

Can the TV move left or right? Yes. The mount can pan the television up to 8 degrees left or right while extended.

What VESA patterns does the mount support? It supports VESA mounting patterns ranging from 100 x 100 to 600 x 450.