Rockford Fosgate P1-1X12-BUNDLE 12" Loaded Subwoofer Enclosure | PBR300X2 300 W 2-Channel Amplifier | RFK8I Installation Kit

Rockford Fosgate P1-1X12-BUNDLE 12" Loaded Subwoofer Enclosure | PBR300X2 300 W 2-Channel Amplifier | RFK8I Installation Kit

This Bundle Includes:

(1) Rockford Fosgate P1-1X12 Punch Single P1 12" Loaded Subwoofer Enclosure

(1) Rockford Fosgate PBR300X2 Punch 300 Watt 2-Channel Amplifier

(1) Rockford Fosgate RFK8I 8 AWG Power & Signal Amplifier Installation Kit

Rockford Fosgate P1-1X12 Punch Single P1 12" Loaded Enclosure Subwoofer

The Rockford Fosgate P1-1X12 is a single P1 12” vented enclosure with 250 Watts RMS power handling wired to a 4-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals. The most convenient way to get low frequency bass in your system is to drop-in a Punch Loaded enclosure. We’re not talking junk in the trunk, we’re talking the same genuine Punch woofers available separately. Rockford Fosgate P1-1X12 Punch Loaded enclosures are constructed with durable 5/8? MDF and tuned by our computer aided design software. P1 Loaded Enclosures feature similar tonal performance as P2/P3 models, but are easier to move in-n-out of vehicles due to their lighter weight. The Rockford Fosgate P1-1X12 ported enclosure fills your ride with juicy, high-volume bass, so you and your passengers can rock out to the latest beats. The enclosure’s Punch P1 12? woofer features a paper cone reinforced with Kevlar fibers, supported by a rubber surround. The heavy-duty motor assembly and advanced cooling vents allow this sub to handle up to 250 watts RMS without flinching. Rugged 5/8? medium-density fiberboard construction means this enclosure will hold strong for fat, heavy bass. Industrial-grade black carpet provides a clean, finished look, and protects your trunk from nicks and scratches. This enclosure uses an advanced port design that promotes generous air movement, while reducing distortion-causing port noise, so you hear louder, deeper bass. Add an amp and some wiring, and feel the thick low end this enclosure adds to your ride.

Rockford Fosgate PBR300X2 300 Watt 2-Channel Punch Amplifier

The Rockford Fosgate PBR300X2 is a 300 Watt amplifier with Boosted Rail Technology, allowing it to be compact and efficient while providing big power. This amp is great for smaller stealth installations, motorcycles and recreational vehicles. The Punch PBR300X2 uses our patented BRT (Boosted Rail Technology) for an ultra efficient design that does not use a switching power supply to generate its rated power. This allows the chassis design to be much smaller than traditional sized amplifiers. The BRT also has a variable hi-level DC offset turn-on circuit for easy installation into any OEM system. It is great for smaller stealth installations, as well as for motorcycles and recreational vehicles.

Tiny giant

You won’t believe how small and powerful this amp is. The Rockford Fosgate PBR300X2 2-channel amp puts out 100 watts RMS each to a pair of speakers, all from an amp you can easily hold in one hand. You can also put this amp in one-channel mode to drive a sub with 300 watts RMS of bumping bass. And an optional wired remote control lets you add Rockford Fosgate’s famous extra Punch from the front seat.

Boosted Rail (BR) amp technology

This Punch Class BR amplifier uses Boosted Rail (BR) amp technology to generate so much power from such a tiny case, with capacitors and high-speed circuitry that boost the amp’s power supply voltage when needed, so it can handle musical peaks without missing a beat. Rockford Fosgate uses this new technology to create a remarkable amp that fits almost anywhere and delivers powerful sound.

Heat management

The amp also features speaker-level inputs with signal-sensing turn-on, allowing you to connect into almost any system without having to run a turn-on lead back to the receiver. An extruded aluminum heat sink combines with Rockford Fosgate’s heat management technology to make sure your tunes keep rockin’ — even when you’re playing loud.

Rockford Fosgate RFK8I 8 AWG Power & Signal Amplifier Installation Kit

8 gauge power, ground and signal installation kit for an amplifier. Kit includes 17 feet of 8 AWG power wire, 3 feet of 8 AWG ground wire, (1) 16 feet twisted pair RCA, AGU fuse holder and fuse, 20 feet of remote wire, 40 Amp fuse.

RFK8I Features:

• FULL spec cable – meets or exceeds AWG (American Wire Gauge) requirements
• 8 AWG (8.36mm²) 735 strands
• Includes appropriate wire termination hardware
• 100% Pure Crystal-Oxygen Free Copper (PC-OFC)

CEA-2015

Rockford Fosgate cables conform to the CEA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.

Includes RCA Cables

This amplifier kit includes RCA patch cables. These are the necessary cables used to transfer low-level signal from the source unit to the amplifier, typically located in the rear of the vehicle.

Includes Fused Dist.

This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.

Includes Power Wire

This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.