Help
Rockford Fosgate RFK4D 4 AWG Complete Dual Amplifier Installation Kit
Product Descriptions
Product Descriptions
Rockford Fosgate RFK4D 4 AWG Complete Dual Amplifier Installation Kit
4 gauge complete power, ground and signal installation kit for two amplifiers.
Kit includes 17 feet of power wire 4 AWG/6 feet of power wire 8 AWG, 3 feet of ground wire 4 AWG/6 feet of ground wire 8 AWG, 30 feet of 16 AWG speaker wire, (2) 16 feet twisted pair RCA's, Maxi fuse holder and fuse, (2) 4 AWG distribution blocks, 20 feet of remote wire, 100 Amp fuse.
RFK4D Features:
- FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- 16 AWG (1.31mm²) 65 strands
- 4 AWG (21.1mm²) 1,862 strands
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Includes appropriate wire termination hardware
- 8 AWG (8.36mm²) 735 strands
CEA-2015
Rockford Fosgate cables conform to the CEA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc.). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.
Includes Power Wire
This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.
Dual Amp Installation
This amplifier kit is designed to install two amps in one system. This includes all necessary cables for proper connection; power, ground, turn-on and RCA signal. All cables in this kit conform to the CEA-2015 AWG specification.
Includes Speaker Wire
This amplifier kit includes speaker wire. These cables connect the amplifier to the speakers. All wires in this kit conform to the CEA-2015 AWG specification.
Includes RCA Cables
This amplifier kit includes RCA patch cables. These are the necessary cables used to transfer low-level signal from the source unit to the amplifier, typically located in the rear of the vehicle.
Includes Fused Dist.
This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.
Features & Specs
Features & Specs
Documents
Documents
Warranty
Warranty
Save $60.00
Payment as low as
This monthly payment does not include any applicable tax or interest
Free Shipping |
Lowest Price Guarantee*
This product is backorderable
Call 1-866-696-7189
Does not apply to special order items.
Product Descriptions
Product Descriptions
Rockford Fosgate RFK4D 4 AWG Complete Dual Amplifier Installation Kit
4 gauge complete power, ground and signal installation kit for two amplifiers.
Kit includes 17 feet of power wire 4 AWG/6 feet of power wire 8 AWG, 3 feet of ground wire 4 AWG/6 feet of ground wire 8 AWG, 30 feet of 16 AWG speaker wire, (2) 16 feet twisted pair RCA's, Maxi fuse holder and fuse, (2) 4 AWG distribution blocks, 20 feet of remote wire, 100 Amp fuse.
RFK4D Features:
- FULL spec cable - meets or exceeds AWG (American Wire Gauge) requirements
- 16 AWG (1.31mm²) 65 strands
- 4 AWG (21.1mm²) 1,862 strands
- 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
- Includes appropriate wire termination hardware
- 8 AWG (8.36mm²) 735 strands
CEA-2015
Rockford Fosgate cables conform to the CEA-2015 industry standard. The standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge size (8 AWG, 4 AWG, etc.). Some manufacturers substitute thicker insulation for copper. With Rockford Fosgate, you get exactly what you pay for.
Includes Power Wire
This amplifier kit includes power wire by including necessary cable for both B(+) and GND(-) connections. Additionally, amplifier kits include remote turn-on power wire. All cables in this kit conform to the CEA-2015 AWG specification.
Dual Amp Installation
This amplifier kit is designed to install two amps in one system. This includes all necessary cables for proper connection; power, ground, turn-on and RCA signal. All cables in this kit conform to the CEA-2015 AWG specification.
Includes Speaker Wire
This amplifier kit includes speaker wire. These cables connect the amplifier to the speakers. All wires in this kit conform to the CEA-2015 AWG specification.
Includes RCA Cables
This amplifier kit includes RCA patch cables. These are the necessary cables used to transfer low-level signal from the source unit to the amplifier, typically located in the rear of the vehicle.
Includes Fused Dist.
This amplifier kit includes fused distribution. It utilizes a stand-alone fuse holder that can be installed in a convenient place under the hood.
