Rockford Fosgate RFPOL-RC5 Polaris Ride Command Interface for Stage-5 Systems

Rockford Fosgate RFPOL-RC5 Polaris Ride Command Interface for Stage-5 Systems

The Rockford Fosgate RFPOL-RC5 connects compatible Rockford Fosgate amplifiers with a factory Polaris® Ride Command® source unit while keeping your factory audio source in place. Designed for Stage-5 systems, this two-part harness handles front, rear, and subwoofer audio signals while helping filter unwanted electronic noise from the DYNAMIX suspension system.

Connect Ride Command® to Your Amplifier

Want to keep the factory Ride Command® system while connecting it to a Rockford Fosgate amplifier? The Rockford Fosgate RFPOL-RC5 is built for exactly that purpose. It retains the factory Ride Command® as the audio source and feeds front, rear, and subwoofer audio signals directly to the amplifier.

The two-part harness works like a traffic controller for your audio signals. One harness interfaces with the front and rear speaker amplifier, while the second connects to the subwoofer amplifier, helping Ride Command® send the proper audio frequencies where they belong.

Designed for Stage-5 Audio Systems

The Rockford Fosgate RFPOL-RC5 is designed to work with the TM1000X5ad or M5-1500X5 amplifier. This dedicated connection gives compatible Ride Command® systems a direct way to feed front, rear, and subwoofer audio into the amplifier.

The interface is designed for RZR®, RANGER™, and GENERAL™ vehicles equipped with Ride Command®. It is also compatible with both 5-button and 7-button Ride Command® systems.

Active DYNAMIX Noise Suppression

Electronic noise can interfere with an otherwise clean audio signal. The Rockford Fosgate RFPOL-RC5 uses an active electronic noise suppressor to filter electronic noise caused by the DYNAMIX suspension system.

It also eliminates pulse-width-modulated noise from the DYNAMIX system and eliminates the turn-on pop associated with the Ride Command® unit. That means the interface does more than simply move the audio signal from one component to another; it also helps keep unwanted electrical noise out of the signal path.

Uses Built-In Ride Command® Crossovers

The Rockford Fosgate RFPOL-RC5 allows your system to use the built-in Ride Command® crossovers, including a 100 Hz high-pass filter and 100 Hz low-pass filter. Why does that matter? It helps Ride Command® distribute the proper frequencies to the appropriate speakers and subwoofer channels.

By handling front, rear, and subwoofer signals separately, the interface keeps audio distribution organized rather than sending every frequency down the same path.

Remote Turn-On Support

The Rockford Fosgate RFPOL-RC5 includes a remote-out connection that turns on the Rockford Fosgate amplifier. Combined with its dedicated harness design, factory Ride Command® retention, and built-in crossover support, it provides the connections needed for a compatible Stage-5 audio setup.

Key Features

• Retains the factory Polaris® Ride Command® as the audio source
• Designed for RZR®, RANGER™, and GENERAL™ equipped with Ride Command®
• Compatible with both 5-button and 7-button Ride Command® systems
• Feeds front, rear, and subwoofer audio from Ride Command® to the amplifier
• Two-part harness design
• Harness works with TM1000X5ad or M5-1500X5 amplifiers
• Active electronic noise suppressor
• Eliminates pulse-width-modulated noise from the DYNAMIX suspension system
• Eliminates turn-on pop associated with the Ride Command® unit
• Uses built-in Ride Command® 100 Hz high-pass and 100 Hz low-pass crossovers
• Includes remote-out to turn on the Rockford Fosgate amplifier
• 1-year warranty

Built for Proper Audio Distribution

The Rockford Fosgate RFPOL-RC5 gives compatible Polaris® Ride Command® systems a direct connection to Rockford Fosgate amplification while preserving the factory source unit. With front, rear, and subwoofer signal handling, active electronic noise suppression, Ride Command® crossover support, and compatibility with TM1000X5ad or M5-1500X5 amplifiers, it keeps the different parts of the audio system working together as one coordinated setup.

FAQs

1. What does the Rockford Fosgate RFPOL-RC5 connect? The Rockford Fosgate RFPOL-RC5 connects a factory Polaris® Ride Command® source unit with compatible Rockford Fosgate amplifiers.
2. Which amplifiers are compatible with the RFPOL-RC5? The harness is designed for use with the TM1000X5ad or M5-1500X5 amplifier.
3. What audio signals does the RFPOL-RC5 carry? It feeds front, rear, and subwoofer audio signals from Ride Command® to the amplifier.
4. Does the RFPOL-RC5 work with both Ride Command® control layouts? Yes. It is compatible with both 5-button and 7-button Ride Command® systems.
5. Does the RFPOL-RC5 use the Ride Command® crossovers? Yes. It utilizes the built-in Ride Command® 100 Hz high-pass and 100 Hz low-pass crossovers to help distribute the correct audio frequencies.